GenBoard/Manual/Config/WidebandDefaultConfig

WBO2 default Config - subpage of GenBoard/Manual/WBSensor

wbo2_warmup_ramp=A0 # 0.2 V/sec wbo2, warmup ramp speed [1.51 mV/sec]
wbo2_warmup_target=FF # variable dropped a long ago
wbo2_abs_limit=E4 # wbo2, heater absolute limit [?]  (DA)
wbo2_limit_maxt=A0 # wbo2, max time spent at abs_limit [262msec] (50)
wbo2_fallback=B0 # wbo2, fallback V after maxt (0xC0 will heat it better than 60, especially when 350C exhaust gas cools the 750C sensor element at idle)
wbo2_retry_t=06 # wbo2, retry control after [4sec]
wbo2_edgetime_corr=BA  # variable dropped in most recent firmwares
wbo2_edgetime_min=50   # variable dropped in most recent firmwares
wbo2_ri_target=96 #wbo2, target Ri (pulse amplitude) [5V/8192]
absolute value: pump+ closest to pump- at startup)
wbo2_heater_pid_kp=46
wbo2_heater_pid_ki=10
wbo2_heater_pid_kd=1A
wbo2_heater_pid_ilimit=80
wbo2_pump_pid_kp=15
wbo2_pump_pid_ki=4E
wbo2_pump_pid_kd=00
wbo2_pump_pid_ilimit=84
wbo2_ri_confidence_scale=80

Controller specific values:


Sensor specific - See GenBoard/Manual/Config/WidebandCalibration

Calibrate yourself in free air, after replacing the sensor!