[[Manual: Detailed.Control.Idle.Config]]
If the engine spins up too high RPM after cranking and takes too much time for iac-dc (check your logs in spreadsheet or logviewer!!!) to start to decrease, your iac_integral_inc_limit is too high.
If that does not lower the idling speed, then check that the 'TPS value for idle threshold (%)' -> (menu Extras -> Idle Settings General -> Idle Settings page in Megatune) has higher value than the actual Throttle Position value when throttle is closed.
If the engine has tendency to stall, than maybe the iac_integral_dec_limit is too high. But remember there can be MANY other reasons for this to happen.
Back to GenBoard/Manual/Config
Back to GenBoard/Manual
See also: