Changes by last author:
Changed:
So, tried shortgap fiat-stilo trigger, but it seemed to sync with wrong cylinder event... tried various settings but eventually went with 1 distributer trigger and two inputs. Primary trigger watches rising edge and the secondary watches falling edge for shorter trigger vane. Trigger vane is about 8 degrees, so I used filtering to remove the other vanes. I could not get Cam sync type working, but alien advance seemed to allow VEMS to sync with cylinder 1. |
* tried shortgap fiat-stilo trigger, but it seemed to sync with wrong cylinder event... ** outputs are adjustable: "wrong cylinder" => the output should be adjusted to fire the "right cylinder" instead Tried various settings but eventually went with 1 distributer trigger and two inputs. Primary trigger watches rising edge and the secondary watches falling edge for shorter trigger vane. Trigger vane is about 8 degrees, so I used filtering to remove the other vanes. I could not get Cam sync type working, but alien advance seemed to allow VEMS to sync with cylinder 1. * probably sorted by now. If not, it is possible to make a useful report (possibly 1 zipfile) which allows further benchtesting and progress: ** triggerlog (not just png image but real .triggerlog file) to see that the HW is set up and works for both triggers ** vemslog (or at least .vemscfg) to see current state ** if cyl wiring is available (with TDC information related to trigger), we can also make ignoutput recommendation (and hopefully get it right) |