History of MembersPage/SkassawiringSubaru
Older Newer
2008-04-28 21:11:51 . . . . 0x535ba385.abnxx12.adsl-dhcp.tele.dk [changed outputs]
2008-04-17 15:27:51 . . . . 0x535ba385.abnxx12.adsl-dhcp.tele.dk [added a diode for p259 protection]
2008-04-13 06:20:05 . . . . 0x535ba385.abnxx12.adsl-dhcp.tele.dk [text about iat sensor]
2008-04-12 11:28:29 . . . . 0x535ba385.abnxx12.adsl-dhcp.tele.dk [added pic of adaptor]
2008-04-12 09:34:43 . . . . 0x535ba385.abnxx12.adsl-dhcp.tele.dk [Added wiring info]


Changes by last author:

Added:
|| [ Start]|| [Questions ]|| [ Injector] || [Ignition] || [Trigger] || [Display] || [Wbo] ||[Config] || [Table] ||[Wiring]|| [Idle] ||

----

I´m using oe wiring, with a custom made adaptor , between Vems and oe wiring.

There is a IAT sensor from the webstore connected external of the wiring, as subaru dont have that oe,and offcourse the wideband sensor

I have on the 3 P259 output that i use, mounted a diode to the flyback wire, hoping for protection, so the relays not is going to kill the chip.

some of the extra parts that´s connected are:

-----

Aircon cut relay = EC36-PIN4 =P259ch0 with added diode

Wastegate control = EC36-PIN 9 =inj 4

Fancontrol = EC36-PIN31 =P259CH6 with added diode

Knocksensor = EC18-PIN 3 =stil disabled

Fuelpump = EC36-Pin18 =inj 5

Tacho output = EC36-PIN16 =p259CH1 with 12v pullup

legacy.jpg