Changes by last author:
Changed:
| *6x Low-Z 85lb/hr Injectors |
| *6x Low-Z 893cc/min (85lb/hr) Injectors |
| Primary Trigger: VR |
|
Power Supply
*Question: What kind of fuse for "450mA F1 on PCB"? Is there a recommended fuse type or installation method? *Question: Do I need to connect D45? I am not using a Stepper Motor. *Question: Is PCB v3.3 supposed to have "D37 Transient supression diode"? My PCB v3.3 board does not have a big diode on it. Genboard Changes for Primary Trigger: VR |
|
Secondary Trigger: Hall
*Remove C103 |
|
Genboard Changes for Secondary Trigger: Hall
*Remove C103 - Question: Is this the small diode in the middle of the last picture? De-solder and remove it? Genboard Changes for Low-Z PWM Injector Driving *Install Power Flyback Board (pictured below) *VEMS Wiki Low-Z PWM Pages **GenBoard/VerThree/LowZInjectors **GenBoard/Manual/PowerFlyback **http://vems.hu/www.vems.co.uk/VEMS/InjectorFlyback.html Anti-Lag VEMS Wiki Pages *MembersPage/GaborRacz/NewAlsLaunchAndOthers PCB v3.3 Assembly and Testing VEMS Wiki Pages *GenBoard/Manual/InitialTesting/VerThree VEMS Distributorless Ignition Wiki Pages |