Versatile Engine Management Systems - VEMS wiki

Older	Newer
		2005-06-12 20:28:19 . . . . MembersPage/MarcellGal [MPX4250AP can be elevated easily]
		2005-06-11 17:08:01 . . . . d207-6-58-51.bchsia.telus.net [Mental note regarding pullup for FETDrivers and Resistor networks]
		2005-06-05 21:08:25 . . . . MembersPage/MarcellGal [solder resistor networks on bottom]
		2005-06-05 18:09:36 . . . . d207-6-58-51.bchsia.telus.net
		2004-08-23 16:32:05 . . . . RichardChwiendacz

---

Changes by last author:

Changed:

Richard: Now you tell me. :) I already soldered them to the top. Out comes the desoldering braid, I suppose. I'll doublecheck R154=10k tonight.

Richard: Now you tell me. :) I already soldered them to the top. No need to desolder (although not hard with a soldersucker). The MPX4250AP can be elevated with spacer at the 2 screws: cutting 2 short pieces of 6x4 pneumatic tube is perfect for this. In fact it's usually elevated a little to align better with the pneumatic connector mounted in the frontplate drill between EC36 and EC18 I'll doublecheck R154=10k tonight.