VEMS Home Products Documentation Wiki Webstore
WikiHome ProjectPage DocsPage UnderDevelopment MembersPage SiteIndex RecentChanges Preferences
History of MembersPage/PeterSzabo
Older Newer
2009-04-28 20:39:07 . . . . 4d6f505c.adsl.enternet.hu [upgrade note]
2009-04-21 19:49:22 . . . . 3e44b692.adsl.enternet.hu [MAT data needed]
2008-04-13 12:50:09 . . . . MembersPage/MarcellGal [use high_boost and kpa_conf=22]
2008-04-13 12:34:58 . . . . catv-5062af0f.catv.broadband.hu [new config and flyback]
2008-04-13 12:10:19 . . . . catv-5062af0f.catv.broadband.hu [flyback update]
2008-04-13 11:24:42 . . . . MembersPage/MarcellGal [hints]
2008-04-13 11:07:17 . . . . catv-5062af0f.catv.broadband.hu [add configs and tables]
2008-04-12 09:13:04 . . . . wireless.h-wnet.hu [up]
2008-04-10 11:12:29 . . . . 3e70d7ca.adsl.enternet.hu [triggertooth and hints]
2008-04-10 11:09:39 . . . . 3e70d7ca.adsl.enternet.hu [hints]
2008-03-31 12:45:18 . . . . 193.224.80.164 [Engine setup help]
2008-03-31 12:18:07 . . . . PeterSzabo [Engine setup help]

Changes by last author:

Changed:
IAT, standard (EC36-2) If you want finetune of MAT (offband request), upload measurement data (note what hex tables you used).
IAT, standard (EC36-2) If you want finetune of MAT, publish measurement data (note what hex tables you used during firmware upgrade). See EasyTherm for overview.

If you upgrade firmware to latest 1.1.5x,

* you need recent VemsTune

* upload some [inital 1.1.5x config]

** without this step there would be much more uninitialized tables and variables

* upload your config afterwards

* review all dialogs and tables

* follow safety procedures (GenBoard/UnderDevelopment/FirmwareChanges, remove fuelpump fuse, injector connectors and ignition fuse).

CLT, standard (2252 ohm ?) (EC36-14)

Deleted:
CLT, standard (EC36-14)