Changes by last author:
Added:
|
Here is what I need from the VEMS shop. I have stolen the table from Richard Barrington, thanks Richard. The table has been adaopted for my needs.
||Part||Quantity||Price||Total||Comments|| ||||||||||Components|| ||Genboard v3.2||1||199.00||199.00|||| ||2.5 bar MAP sensor||1||23.00||23.00|||| ||Stepper driver||1||3.00||3.00||Run the factory idle setup|| ||FET drivers||4||1.90||7.60||2 banks of injectors, 1 channel WBO2, 1 spare|| ||IGBT ignition drivers||5||3.70||18.50||4 coils in wasted spark, 1 spare|| ||WBO2 sensor||1||57.70||57.70|||| ||||||||||Case|| ||Alubos case with 4 drill holes||1||27.00||27.00||If not p'n'p|| ||Alubos EC frontplate transparant||1||9.00||9.00||ditto|| ||Alubos endplate transparant||1||8.00||8.00||ditto|| ||Alubos gasket||2||2.00||4.00||ditto|| ||Clamping plate||2||5.00||10.00||ditto|| ||||||||||Loom|| ||Econoseal 36 PCB||1||11.00||11.00||If not p'n'p|| ||Econoseal 36 wire||1||9.00||9.00||Ditto|| ||Econoseal 18 PCB||1||7.00||7.00||Ditto|| ||Econoseal 18 wire||1||8.00||8.00||Ditto|| ||Wideband connector||1||8.70||8.70|||| ||||||||||Extras|| ||VEMS sticker||1||0.00||0.00||Advertising under the hood|| ||VEMS ECU badge||1||0.00||0.00||Advertising on either case|| ||Serial jack kit||1||1.90||1.90||Looks better in the car|| ||DSUB9 male||1||1.00||1.00||PC end of the cable|| ||||||Total (Euro)||413.20|||| Other parts needed: I need a 36-1 crank trigger wheel and VR (variable reluctance) sensor. I think this is a 60-2 trigger, but might be a usable piece of kit on the (4.0/4.6?) Rover V8? http://www.disco2.com/tech/v8engine/#fly :No this does not fit with my flywheel. I have an aftermarked flywheel. I can only see a crank wheel work. |