VEMS Home Products Documentation Wiki Webstore
WikiHome ProjectPage DocsPage UnderDevelopment MembersPage SiteIndex RecentChanges Preferences
History of MembersPage/PeepPaadam/AudiAFourTurbo
Older Newer
2006-11-21 17:41:03 . . . . MembersPage/PeepPaadam [Update on project (car is running good)]
2006-11-01 17:03:10 . . . . MembersPage/PeepPaadam [LCD is still behaving very oddly.]
2006-10-29 11:19:17 . . . . MembersPage/MarcellGal [LCD hints]
2006-10-28 17:13:37 . . . . MembersPage/PeepPaadam [LCD showing full display of question marks...]
2006-10-23 07:15:03 . . . . MembersPage/EmilLarsson [better to remove whole chip.]
2006-10-23 06:43:19 . . . . MembersPage/PeepPaadam [Update: car is running and clean-up.]
2006-10-23 06:41:21 . . . . MembersPage/PeepPaadam [Got the car running]
2006-10-23 06:05:48 . . . . 81.net216.skekraft.net [cutting the chip away]
2006-10-20 16:30:10 . . . . MembersPage/PeepPaadam [How to get rpm signal without P259?]
2006-10-20 10:56:07 . . . . MembersPage/EmilLarsson [P259 removal]
2006-10-19 11:43:12 . . . . MembersPage/PeepPaadam [How to]
2006-10-19 08:36:40 . . . . MembersPage/PeepPaadam [Did I fry i259 chip?]
2006-10-13 15:49:19 . . . . MembersPage/MarcellGal [how to lower LM1815 threshold]
2006-10-13 14:39:56 . . . . MembersPage/PeepPaadam [Problem narrowed down to the VEMS box (tried another box and worked)]
2006-10-13 09:19:28 . . . . MembersPage/EmilLarsson [coil type setting on multitooth wheel gives very high signal]
2006-10-13 09:16:54 . . . . HansK [note]
2006-10-13 05:26:34 . . . . MembersPage/PeepPaadam [Still no rpm, but an idea. Need confirmation.]
2006-10-13 05:24:27 . . . . MembersPage/PeepPaadam [Tried different settings, still no go.]
2006-10-12 13:54:40 . . . . MembersPage/PeepPaadam [Answered Q]
2006-10-12 13:50:23 . . . . HansK [Added my trigger settings and Q.]
2006-10-12 13:29:58 . . . . HansK [Added my trigger settings]
2006-10-12 07:56:24 . . . . MembersPage/PeepPaadam [Can't get rpm signal, config added]
2006-10-08 19:19:43 . . . . MembersPage/MarcellGal [linked a presumably older version of this throttle]
2006-10-08 14:34:56 . . . . MembersPage/PeepPaadam [Audi A4 1.8T throttle body question]

Changes by last author:

Changed:
Car is from year 1997. It sports turbocharged 1.8liter inline four, has passive coil-on-plug ignition system and crank triggers: primary VR (60-2 wheel) and HALL as cam sync.
Car is from year 1997. It sports turbocharged 1.8liter inline four, has passive coil-on-plug ignition system and crank triggers: primary VR (60-2 wheel) and HALL as cam sync. Garrett GT28RS turbocharger is installed also.

Update: car is running very good right now on 1 bar. LCD issue is still there but I'm going to swap it with another since the one from my car worked ok.

--------

Added:

A: *Manmli showed normal digits (RPM: 0000 etc)

*Cable length is usual 1m

*Tried different LCD and different VEMS unit, though it's all the same..... WTF is it? Checked the wiring AGAIN and it corresponds to DB9_new_pinout and even colours are the same.

Configs are here, though it's with the other unit: http://www.vems.hu/wiki/index.php?page=MembersPage%2FPeepPaadam%2FAudiConfig