-----------------------------------------------------------------

hi thanks for getting back

the engine was timed and running on the original ecu so the engine has been timed with the right tools

i might sound ignorant but not sure what you mean by verify ignition timing my timing gun dont work with coils ?

if i go to the test function

and test the 1st cylinder injector it fires no 1

then the next one in firing order it fires the injector on cylinder 5 and so on ..

the excel document and the base map have different pinout could you check so i know my wiring is correct.If u say that the base map is correct to the excel sheet them i will load the m50 vanos1.2.31-13xxx and use it but it is different so i am getting confused

the base map m50vanos 1.2.31-13xx has

ec36-17 as cylinder 1

ec36-6 as cylinder 4

where as in the excel doc they are idle control pins

the others are also different

please advice

i have caliberated the map it was a 250 sensor i am now getting fuel

also my tdc angle for cylinder 1 is 324degree

but the base map is set different

(i am a noob at this sorry )

thanks DEV