Changes by last author:
Changed:
|
* VEMS Genboard v3.3 (1.0.38)
* Bosch 337cc/min 3 bar Low-Z injectors |
|
* VEMS Genboard v3.3 (1.0.69)
* Delphi 525cc/min @ 3 bar High-Z injectors, transient diode |
|
Q&A:
Q: also considering wasted spark ? A: No, I'm not considering wasted spark on this engine. Q: what is the tooth-pattern of the crankwheel ? A: Here is the trigger wheel |
|
Update 2007-06-18
The engine runs only on cyl 3 and 4, it got spark and fuel on all (But not at the right time?) New plugs, cables, distributor cap and rotor. Ignition sequence: 1-3-4-2 |
| Update 2007-06-28 |
| Injectors: Cy 1: Injector A, Cyl 2: Injector B, Cyl 3: Injector C, Cyl 4: Injector D |
|
Got it running and took it out for a spin 24/6.
Boost is 0.5 bar atm, it runs pretty well, dyno tuning in a month. |
| Injector outputs: 0: 8 1: 2 2: 4 3: 1 |
|
|
This would give 4-2-3-1 injection sequence? Also tried 2-4-3-1.
Divider 1, Alternate banks from h[0] 3..0, Fire banks when cranking: Alternate. To be sure its not the ignition I tried a Lumenition stand alone ignition, it still fires only at 3 and 4. Also used a LED on the injector sockets, works ok. msq file: http://oeb.no/150607.msq |
| Compomotive MO 8x18 wheels and the Group A rear spoiler is still to be fit. |
|
|