History of MembersPage/OlavAlexanderMjelde
Older Newer
2007-12-30 11:56:58 . . . . 53d83b43.adsl.enternet.hu [similar to BMW. check pins 1 by 1]
2007-12-27 10:17:54 . . . . 85.19.187.20 [Adding Info]


Changes by last author:

Changed:
Q: I dont know if this is enough information to get a confirmation or denial if that box will work?
Seems to have similarities with PlugAndPlayMotronic/BmwEngines

* Get the xls spreadsheet

* compare all motronic55 pins, make new spreadsheet if necessary.

* measure harness with motronic removed:

** grounds

** sensors (resistance)

** supply voltage at motronic55pin37 (+12V might be supplied by ECU or harness, when ign is on).

Added:
* same task applies, see above
Changed:
Ps. I know I would have to wire EGT and WB-lamda "outside" of the OEM loom.
EGT and WB-lamda "outside" of the OEM loom, that is no problem.