Changes by last author:
Changed:
| Installing 1.0.78 (now properly,setting all the needed values),car suddenly loose its Idle control ability,after setting the Knock SD card value to 240. |
|
Notes
* Q W E R + - keys dont work in VEMStune. * We also had problems connecting a GPS to it via bluetooth. ** Did you find the com-port (using brayterm or hyperterm) where the bluetooth spits out the NMEA data ? ** you need to set up comm-port with your bluetooth utility first ** baudrate usually does not matter |
| Tough there are some datas in the SDLog,its very confusing,sometimes it logs the 0 RPM areas too! |
|
----
SD log tests - 1.0.78 |
| Also Q W E R + - keys doesnt work in VEMStune. |
| reported problem: After setting the Knock SD card value to 240, car suddenly lose idle control (iac duty sticks to the actual value). "Suddenly" means that even before a reboot ? |
| We also had problems connecting a GPS to it via bluetooth. |
|
* there is some data in the SDLog,its very confusing, sometimes it logs the 0 RPM areas too
** yes, it logs 0 RPM areas if the engine stalls. We tried to reproduce the weird SD_log => idle interference. * firmware 1.0.78 ** we had no uptodate mcd/mct for Balazska Audi, so used old config/tables * [benchtest mcd mct and logfiles] created with VemsTune and SD logger at the same time ** SD log started with automatic log start ** VemsTune logger started manually *we changed the RPM, the EGT and TPS * checked IacINT, IacDC: apparently ok * the 2 logs have slightly different sample-rate, the 2 logs will never be completely identical *in MegaLogViewer the two files can be compared visually (first open one and choose "compare to" menu ) |
| We think that a personal meeting is needed,to show all the problems on a working car. |