History of MembersPage/MarcellGal/WorkShop
Older Newer
2016-07-09 06:38:05 . . . . catv-80-98-142-196.catv.broadband.hu [added compressor link]
2006-10-30 12:07:07 . . . . MembersPage/MarcellGal [updated partner shops]
2004-12-30 10:21:02 . . . . MembersPage/MarcellGal [storage and exhaust seems arranged]


Changes by last author:

Changed:
Since I don't have my own (engine- and mechanical) workshop, I outsource most mechanical works (and storage).
Since I don't have time to run my own (engine- and mechanical) workshop, I outsource most mechanical works (and storage).
Changed:
For project: MembersPage/MarcellGal/EngineSwap.
Originally for project: MembersPage/MarcellGal/EngineSwap.

Related page:

* MembersPage/MarcellGal/CompressorAutostart

Changed:
* ideally it should be walk or bike (1..5km) distance from where I live (Budapest IX). At the same time, I could teach them ECM and electronic aspects if they like.
* they can get some ECM and electronic education if they like.
Changed:
* MembersPage/NanassyPeter and Karkus (15 km) best at audi 5cyl and exhaust / intake and other mechanical works
* MembersPage/NanassyPeter and Karkus (15 km) best at audi 5cyl and exhaust / intake and other mechanical works

* designed and built several (3 axis and 4 axis) CNC-s with a partner who operates them (even with <20hours/week utilization ROI ~ 2 years)

** originally licensed sheetcam to generate G-code from several 2D drawings (several layers in 1 dxf file) at different heights, like the overlapping frontplate

** later with more complex software: 3D parts also (like Si moulding tools), collecting experience with this

** just installed a powerful UPS (uninterrupted power supply), because even a short power outage is very inconvenient

** CNC plasma-cutter with automatic height regulation (designed, but not built yet)

* CNC lathe partner

* several manual lathe-s (one small, one big, most of them are medium size); useful for prototype work (and good assist in/near any workshop) one guy is actually very good at series work also (competitive with CNC-lathe, surprisingly)

Changed:
* own location (we had to rent a big house for other reasons): it has a garage for 3 cars, but only 1 door and NO pit (what a pity!).

* storage location (my old engine at gf-s parents; 40km)

* own locations

* storage locations (several; and outsourced to partners)