Changes by last author:
Changed:
| * Base map ignition outputs had to be rotated 4 tries to get the car to start. |
|
Start the install from the very beginning. 1. remove all "OLD" stuff from the page. Make a separate page for each install 2. Follow Is this a motronic-55 or econoseal ECU ? Even if it's not a motronic ECU, you want to start from that and change the outputs to be suitable (preferrably on the bench, do not kill ignition coils or fill the cylinder with fuel). * Base map ignition outputs had to be rotated 4 tries to get the car to start ** Since it's a nonstandard wiring (5 IGBT with 5 power-input coils suggest) that does not sound like a big surprise |
| ** what is "basemap" ? MegaTune disabled sectrig somehow ? Or you suspect that the firmware itself disabled sectrig ? (the latter is extremely unlikely) |
| ** same as the previous |
| ** if you configure shiftcut, make sure that chosen input is pulled up to +5V. (easiest to use order note "analog inputs pulled up", but still verify). Without pullup it drifts |
|
Something is very wrong, start according to 1. |