History of MembersPage/JohanRius/MyShoppingList
Older Newer
2004-11-17 20:43:07 . . . . MembersPage/MarcellGal [hints]


Changes by last author:

Added:
This is what I think I will need (plus some extras for the future).

Box:

*1 x Alubos EC Frontplate. I recommend transparent

*1 x Alubos Endplate. I recommend transparent

*2 x Alubos Gasket.

*1 x Alubos 1600.

*2..3 x Clamping Plate. 2 is the minimum for 5 FET + 4 IGBT, but 3 is not too many (especially if using extra switches for extra functions)

Connectors:

*1 x Econoseal18-PCB.

*1 x Econoseal36-PCB.

*1 x Econoseal18-Wire.

*1 x Econoseal36-Wire.

ECU:

*1 x GenBoard v3.x

*5+ x FET: FQPF20N06L. (one for WBO and four for injectors. Any spare? Often very useful for extra functions.)

*4+ x Ignition IGBT. (one should do, but for future COP i'll need four, right?)

*1 x MPX4250AP.

*1 x AD597AR.

*1 x NTC 2k2.

*1 x TPIC8101DW.

WBO and EGT:

*1 x WideBandO2 Sensor.

*1 x Wideband Connector.

*1 x K-thermocouple.

So... The big Q, have I missed something?