VEMS Home Products Documentation Wiki Webstore
WikiHome ProjectPage DocsPage UnderDevelopment MembersPage SiteIndex RecentChanges Preferences
History of MembersPage/JohanMo
Older Newer
2006-03-16 04:43:08 . . . . MembersPage/MattiasSandgren [comment on K-compensational cable]
2006-03-16 04:43:08 . . . . MembersPage/JuhaK [Injector pulse on boot]
2006-03-16 04:43:08 . . . . MembersPage/MarcellGal [bootup "priming pulse" - R154 investigation]
2006-03-16 04:43:08 . . . . MembersPage/JuhaK
2006-03-16 04:43:08 . . . . MembersPage/JuhaK
2006-03-16 04:43:08 . . . . JohanMo [Soldered R154, all inj drivers still light up, EGT question]
2006-03-16 04:43:08 . . . . JohanMo [Soldered R154 all inj drivers still light up, EGT question]
2006-03-16 04:43:08 . . . . JohanMo [Soldered R154 still light up, EGT question]
2006-03-16 04:43:08 . . . . MembersPage/MarcellGal [I wouldn't change the diodes]
2006-03-16 04:43:08 . . . . JohanMo [flyback continues..]
2006-03-16 04:43:08 . . . . MembersPage/MarcellGal [nice progress. answers]
2006-03-16 04:43:08 . . . . JohanMo [Some questions+new pictures]
2006-03-16 04:43:08 . . . . 90.net100.skekraft.net [digitalout table]
2006-03-16 04:43:08 . . . . JohanMo [Question about mdh]
2006-03-16 04:43:08 . . . . MembersPage/MarcellGal [diode art]
2006-03-16 04:43:08 . . . . JohanMo [Another flyback question]
2006-03-16 04:43:08 . . . . MembersPage/MarcellGal [answered diode and WBO2 cal question]
2006-03-16 04:43:08 . . . . 16.205.216.81.k.siw.siwnet.net [Back on track!! Question about WBo2 freeair calibration, and flyback diodes.]
2006-03-16 04:43:08 . . . . 16.205.216.81.k.siw.siwnet.net [Back on track!! Question about WBo2 freeair calibration. And flyback]
2006-03-16 04:43:08 . . . . 16.205.216.81.k.siw.siwnet.net
2006-03-16 04:43:08 . . . . 16.205.216.81.k.siw.siwnet.net
2006-03-16 04:43:08 . . . . 16.205.216.81.k.siw.siwnet.net [Back on track!! Question about WBo2 freeair calibration.]
2006-03-16 04:43:08 . . . . MembersPage/MarcellGal [explained zener]

Changes by last author:

Added:
*Late answer I know.. I've tried it on one particular setup, and it made 20-30 C difference at 600-700 C and the error was constant. To be anal about it, do it properly with real K-compensational cable and K-connectors in the front end plate. [Like I did here] It didn't take much effort really. /Mattias