Changes by last author:
Added:
|
Audi 10VT engines in historic rally in Group B
[Jobparts Ab] is building many cars for rally and some for road. Fredrik from Stockholm... Original factory ECU was (35 pin?) and orange color... New ECU box MUST be painted orange ... * exact color: RAL... ? ** or at least a photo of ECU ? (not the car!) Trigger setup ? Auditrigger ? * primtrig=VR 135 tooth * sectrig=auditrigger crankhome VR=1pulse, and camhall 1 pulse ? * is that correct ? I think that "cart" could be a starting point: * NTC type MAT sensor * LSU4 sensor * maybe EGT sensor ?? * VEMS ECU (EC36+18 version, box painted orange...) with VR, Auditrigger (camhall-inverter), 400 kPa internal MAP sensor and 6 IGBTs * v3-twinshieldharness I6 would be best for that engine (most connectors are AMP type "injector connectors", 2 or 3 pin). But to proceed someone local (in Stockholm) would be needed to do on-site verifications / measurements, and cooperate with remote assistance (whoever that be). ---- At this moment I can order at least 3 boxes with all parts and 5 cables looms if that helps. If econoseal version (as it seems now) it's "almost standard", no "set-up costs", so 1 initially is probably best to see that it fits as you like (or if any changes needed). |