Changes by last author:
Changed:
| Problem is that triggerlog shows no secondary trigger or spark events. As well as no RPM while cranking. Primary trigger seems fine. |
|
Installed camHALL inverter and [car finally started, without any problems] CONGRATS.. Thanx for cooperating and thematically sorting it. Have fun with your project (tuning, idle, power, gizmos, whatever...). If you happen to order another VEMS v3 ECU (econoseal, motronic55 or other type before 2016-07) (with your real name/addr we know from elsewhere), write in the order comment: "-150 EUR ... and refer to this URL."
Problem was that triggerlog showed no secondary trigger or spark events. As well as no RPM while cranking. Primary trigger seems fine. |
| ** without cam-HALL inverter is nonstandard (since ages), so default AAN config needs ignout and triggertooth change to work |
|
** without cam-HALL inverter is nonstandard (since ages): since it is much more prone to any noise (from wheel, or ign, or other) that way. As it turned out, the standard cam-HALL inverter was REALLY needed for this install. So much sisiphos-work was caused by saving a small NPN (~0.02 EUR) as originally assembled (by a reseller) in a nonstandard way. Let's learn from that.
** also, without cam-HALL inverter, default AAN config needs ignout and triggertooth change to work |