History of MembersPage/FabioAudi/IgnitionOutputs
Older Newer
2008-07-29 17:30:37 . . . . 53d82f78.adsl.enternet.hu [ignout]
2008-02-25 19:54:53 . . . . 53d82527.adsl.enternet.hu [ign pins and h[2]]


Changes by last author:

Changed:
With the HALL signal set properly, masking away the pulse 62BTDC cyl1 (and allowing 134 BTDC cyl5 pass through)

h[2]=cyl5 cyl4 cyl2 cyl1 cyl3 .. .. ..

h[2]=60 00 20 30 10 70 70 70

----

Marcell's engine without inverter, or normal (==Fabio's) engine WITH camhall inverter: (masking away the 134 BTDC cyl5 pulse and allowing 62BTDC cyl1 pass through)

* trigger_tooth=0, ign tdcdelay=58 degrees:

* h[2] cyl=1 3 5 4 2 . . .

* h[2]=68 40 38 48 58 50 50 50 (AAN with logiclevel outputs)

* h[2]=30 10 60 00 20 70 70 70 (Fabio bypassed the ignition power output stages and driving coils directly with IGBT, 5A fuse for each channel)

** change fuses to 7.5A if engine runs and revvs fine with the 5A fuses

----

Marcell's engine with inverter, or normal engine WITHOUT camhall inverter (masking away the pulse 62BTDC cyl1 and allowing 134 BTDC cyl5 pass through)

* trigger_tooth=8, ign tdcdelay=66 degrees:

* h[2] cyl=5 4 2 1 3 . . .

* h[2]=38 48 58 68 40 50 50 50 (normal AAN with logiclevel outputs)

* does NOT apply to Fabio's engine, since he has camhall inverter