Changes by last author:
Added:
|
Trigger 60-2, VR
---- VR polarity * EC36pin27 detects falling edge * MegaTune configured ** rising edge: yes, internal signal is rising edge, unlike the EC36pin27 ---- Position * primary_trigger=01 # Multitooth, OK * secondary_trigger=02 # secondary off * tooth_wheel=3A # 58, ok (60-2) * trigger_tooth=0F # tooth 15 * another_trigger_tooth=1E # 30, perfect * crank_minper=01 # OK Camsync related (not important) * tooth_wheel_twidth1=06 # 06, should be 2 ! * tooth_wheel_twidth2=0B # 11 ? should be 6 * cam_sync_r_edge_phase=FF * cam_sync_f_edge_phase=FF * reset_engphase_after=FF # should be 0xF0= 240 !!! Dwell: * ign_dwell14=32 * ign_dwell6=6F * ign_tdcdelay=78 # trigger to TDC 120*0.5=60 degree * ign_crank_advance=24 * ign_out=70 # OK * ignchmax=03 # ign 3..0, OK cyl1TDC is 35 crankdegrees after tooth0 (tooth after the missing tooth). 35 degrees is too small (would limit max ignition advance!), so we delay with 1 event: ** another trigger tooth: 30 (60/2 termeszetesen) ** Trigger Tooth: 26 (in hexa: trigger_tooth=1a) ** trigger to TDC : 59 degrees See MembersPage/BmwVenesz/Ignition ignition sequence must be configure for outputs 1,4 2,3 1,4, 2,3 since it travells backwards, and we want to fire 2,3 because of the shift (mivel 1-el eltoltuk, a 2,3-at akarjuk eloszor tuzelni: de a tablazatot visszafele kell olvasni!) |