VEMS Home Products Documentation Wiki Webstore
WikiHome ProjectPage DocsPage UnderDevelopment MembersPage SiteIndex RecentChanges Preferences
History of GrmRacer/TestHarnessSetup
Older Newer
2006-03-16 04:43:08 . . . . MembersPage/MarcellGal [0.43V is acceptable]
2006-03-16 04:43:08 . . . . pcp0010862257pcs.longhl01.md.comcast.net [WBO2 setup/test problem]
2006-03-16 04:43:08 . . . . pcp0010862257pcs.longhl01.md.comcast.net
2006-03-16 04:43:08 . . . . pcp0010862257pcs.longhl01.md.comcast.net
2006-03-16 04:43:08 . . . . pcp0010862257pcs.longhl01.md.comcast.net
2006-03-16 04:43:08 . . . . pcp0010862257pcs.longhl01.md.comcast.net
2006-03-16 04:43:08 . . . . MembersPage/MarcellGal [bootloader hints]
2006-03-16 04:43:08 . . . . pcp0010862257pcs.longhl01.md.comcast.net [Derrick's board repair.]
2006-03-16 04:43:08 . . . . pcp0010862257pcs.longhl01.md.comcast.net

Changes by last author:

Changed:
* WBO2 pump(+) 100ohm nernst - 100ohm pump(-)
* WBO2 pump(+) - 100ohm - nernst - 100ohm - pump(-)
Added:
Voltage between nernst and pump- is 0.43V instead of 0.45V. Acceptable. Might be caused by too low

* main supply voltage (if < 10.5V)

* wbo2_nernstdc_target

* wbo2_pump_pid_ki (unlikely)

Changed:
wbo2_nernstdc_target=8D
wbo2_nernstdc_target=8D # slightly increase this