Changes by last author:
Changed:
* dsub15pin9: Vout-gndref (voltage output signal) -. Remember to connect to GND or max 2..5V potential (with higher voltage on this pin, max output voltage on Vout will be limited) |
* dsub15pin9: Vout-gndref (voltage output signal external reference). Remember to connect dsub15pin9 to GND - while GND of the Round (DSUB15 pin 13,14 and 15) must be connected to the GND of the receiving device
** alternatively dsub15pin9 vout-gndref can be on max 5V potential (with higher voltage on this pin, max output voltage on Vout will be limited) |
If you need multiple amplified K-thermocouple signals (or need the round output voltage signal for lambda), use the small and cost effective [EGT amplifier]. * Often used with multichannel dataloggers or motec, that lacks K-thermocouple inputs but has 0-5V analog inputs. |