##### ## ## ## ## ## ## ## ##
#### ## ## ## ## ## ####
# # # # # # # # ##
## ## ##### ## ## ## ## ## ##
## ## ## ## #### ## ## ## ##
IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now. Visit Preferences to set your user name Summary of change: Hello All, My Name is Jens and live in Denmark. I´m here because interest and because I´m stuck with my Vems project. . Project Car: Nissan 200sx Ca18det 1992 EU Model. Norris Designs 2009 Fast road engine with H steel rods. GT2860RS, 550cc injectors, big intercooler/oil/water, 60mm TB, Ca16de inlet cam on 118", 3" Exhausts and Cat. . Suspension: HSD coilover. Brakes: Front 299x32 sky brakes. Wheels: Rota et10 16x8 Toyo/R888 225/45. . I am totally new in the world of engine management. . I use most of the original wiring with an adapter connection. Assembled v3.6 controller prepared for 300kpa, 2xEGT, knock and lcd. Nissan 24slot+sync CAS trigger. LSU4 Wideband. MAT sensor. Pneumatic valve 3way. . I have connection between my PC and Vems Controller. Megatune2.25 Vems Genboard V3 16x14 High-boost . The 2-April-10 progress. Today I tried to find cyl.1 TDC on the pulley with strope but even if I have spark at spark plugs the mark.0 fly around on the pulley. I tried to adjust the 'TDC after the trigger(deg)' from 0-127.5 I read: Engine Speed: 220Rpm at the starter. Throttle Position: OK Spark Angle: 0deg Pulse Width: ? Engine Map: 1.025Kpa Manifold Air Temp: 21C Outdoor temperature was 10C Coolant Temp: 22C Outdoor temperature was 10C Battery Voltage: 12V- 13.5V Optional: Add document to category: Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.