_    
    / \   
   / _ \  
  / ___ \ 
 /_/   \_\
          

 ___   
(  _`\ 
| (_(_)
|  _)_ 
| (_( )
(____/'
       
       

 _____ 
/  __ \
| /  \/
| |    
| \__/\
 \____/
       
       

    ##   
         
    ##   
    ##   
    ##   
    ##   
    ##   
  ###    

 _   _ 
( ) ( )
| `\| |
| , ` |
| |`\ |
(_) (_)
       
       

IMPORTANT: enter the case-INsensitive alphabetic (no numbers) code AND WRITE SOME SHORT summary of changes (below) if you are saving changes. (not required for previewing changes). Wiki-spamming is not tolerated, will be removed, so it does NOT even show up in history. Spammers go away now.


Visit Preferences to set your user name
Summary of change:
Audi 80 Avant RS2 working on VEMS for the past 7 months. working on version 1.1.27 with very stable idle and good setup. i want to go to vemstune 1.1.62 BUT i have some issues 1) When i open vemstune with 1.1.62 version (default vemsconfig) i try to make changes on various areas and nothing gets saved. do i have to have the laptop connected to the ECU to make any changes and save them? can i not just do the same as it does with megatune? make all the changes i want, save and then connect in the future to the ECU and send the new config there? 2) If i have 1.1.27 working perfectly on the car,can i use the same settings on 1.1.62 (like trigger,injectors, ignition etc.)? there is audi trigger on 1.1.62 and it is not there on 1.1.27.what will i choose? 3) do i have to recheck with the strobe light again for the timing? I now have 57Deg after trigger. what settins should i use so that i can have that set correctly? thanks ----------------------------------------------------------------- 8/10/09 I have managed to figure out a few things about vemstune and have copied most of the settings on the 1.1.62 version new problem: Vemstune has boost settings for rpm vs map. However, instead of rpm it only allows you to put kPA!!! so you cannot build an rpm vs boost table! ----------------------------------------------------------------- 11/11/09 it seems that vemstune 2/10/09 does not have this problem. Only the latest version of it has the problem with the kpa/kpa boost curve.
Optional: Add document to category:
Wiki formatting: * is Bullet list ** Bullet list subentry ... '''Bold''', ---- is horizontal ruler, <code> preformatted text... </code> See wiki editing HELP for tables and other formatting tips and tricks.