# This file is a sample file in CVS repository firmware/doc # 1) copy it from the firmware/doc/ directory (up one level to firmware/) # 2) change it to your taste. # It is your personal configuration file in which eg. LCD display can be enabled # 3) recompile the firmware # 4) save it and publish together with your config and tables files. # Both are very important, should you need help. # board type: # MY_CONF += -D GENBOARD MY_CONF += -D GENBOARDv3 # MY_CONF += -D AFRESHBOARD # When you have MC34151 chips on v3 (now standard), you need this: MY_CONF += -D FETDRIVER_INVERTING # LCD display # to enable MY_CONF += -D LCD # specify size #MY_CONF += -D LCD_2x16 #MY_CONF += -D LCD_4x16 MY_CONF += -D LCD_4x20 # specify character set #MY_CONF += -D JAPANESE_LCD # 4x3 Keyboard (almost useless) #MY_CONF += -D KEYBOARD # Software PWM idle valve (was: IDLE_PWM_SOFT) # control moved to config.iac_conf # PS2 keyboard (very useful) MY_CONF += -D PS2KEYBOARD # Generate debug statistics MY_CONF += -D BENCHMARK # Display temperatures in Celcius MY_CONF += -D CELSIUS # High precision VE-table used in fuelcalculations by default #MY_CONF += -D LOW_PRECISION_VE # disable ignition: #MY_CONF += -D NOIGN # makes MISC output high after powerup (needed for bootloader, but is it used?) #MY_CONF += -D IGN_OUT_INVERTED # this is default for v3 (so not needed any more, but set h[2] table and config.ignchmax): # MY_CONF += -D DIRECT_IGN # MSTweak3000 is broken, we zero the idle bit (send status & 127) so it does not fall to knees MY_CONF += -D MS_COMPATIBILITY # WBO2 related config: (you need a license to enable it, see Copyright in wbo2.c) # WBO2 support on v2 (with helper circuit) will be gone soon # MY_CONF += -D WBO2 # MY_CONF += -D HEATER_INVERTED # MY_CONF += -D HEATER_PORT=PORTB # MY_CONF += -D HEATER=6 # Enable 8x16 tables # MY_CONF += -D VE_SIZE_RPM=16 # Other things ... #MY_CONF += -D BUTTON #MY_CONF += -D COMM_AUTO_DUMP #MY_CONF += -D VAL_T_16BIT #MY_CONF += -D PHASESIGNAL # for v3 with lotsof free outputs, this is nice. # set parameters in config (possible to disable in config as well!): # MY_CONF += -D WOT_OUTPUT_TPS_THRESHOLD # Programmable miscellaneous outputs (like the WOT above, but RPM, TPS and MAP can be used in conjunction) # Possible usages: shift light, electronic boost control, N2O output, dummy secondary inj. enabling, etc. # MY_CONF += -D MISC1OUT # MY_CONF += -D MISC2OUT # there are other things, which are only interesting for developers # or serious (nonstandard) hacks: you can override almost anything. Eg LCD_MAPPING # can select an AVR => LCD portmapping which is not standard for the given board type, # and even the port used for DATA and the pin used for ENABLE can be chosen individually